ITM-1250 LMGA (RF)
Saw band dimensions:
12000 x 67 x 1.6 mm (80 mm Optional, If required)
Cutting capacity:
Ø1250mm ▢1250 x 1250mm
Categories: Heavy line, Horizontal cutting bandsaws series
High Quality High Rigidity High Efficiency
ITM-1250 LMGA (RF)
Saw band dimensions:
12000 x 67 x 1.6 mm (80 mm Optional, If required)
Cutting capacity:
Ø1250mm ▢1250 x 1250mm
Features of ITM-1250 LMGA (RF)
High Efficiency Power Transmission to Saw thru PLANETARY GEAR BOX.
Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.
Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.
Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.
NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.
Powerised wire brush unit.
A.C. frequency control drive for infinite variation of band speed thru control panel.
Hydraulic Floating Shuttle Vice for uneven Bars.
Bar exhaust control unit.
Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice.
State of art four point pillar type Hydraulic Blade Tensioning. .
Infinitely variable Feed Control Valve for Setting the Cutting Rate.
Automatic height adjustment for saw frame to save idle time.
Auto indexing shuttle of stroke length of 600 mm (Stroke length shall be 550 mm with Bundle) and synchronized with auto cycle.
Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.
Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.
Ergonomically designed Electrical Control Panel.
Automatic Machine OFF, in case of Blade Breakage.
Technical Data ITM-1250 LMGA (RF)
LengthWidthHeight | 5500 mm1400 mm3675 mm |
Supply voltageProtection degree | ~3 x 415V, 50HzIP 54 |
TypeOutput | ~ 3 x 415V, 50Hz20 HP |
Coolant motorHydraulic motor | 0.33 HP2.0 HP |
12500 x 67 x 1.6 mm (80 mm Optional, If required) |
 |  |  |  |
| Ø1250mm | Ø1250mm | 1250 x 1250mm | 1250 x 1250mm |
Productos relacionados
Personal service
Do you have questions about our product range or do you need technical advice?