Automatic – Indotech Saws Europe S.L. https://www.indotechsaws.com Saws cutting machine Wed, 19 Nov 2025 08:36:13 +0000 es hourly 1 https://wordpress.org/?v=6.9.4 https://www.indotechsaws.com/wp-content/uploads/2021/11/indotechlogocortonormal42.png Automatic – Indotech Saws Europe S.L. https://www.indotechsaws.com 32 32 ITM 2000×1500 LMGA https://www.indotechsaws.com/producto/itm-2000-1500-lmga-rf/?utm_source=rss&utm_medium=rss&utm_campaign=itm-2000-1500-lmga-rf https://www.indotechsaws.com/producto/itm-2000-1500-lmga-rf/#respond Wed, 24 Nov 2021 20:07:13 +0000 https://www.indotechsaws.com/?post_type=product&p=30843 Saw band dimensions: 15930 x 80x 1.6 mm Cutting capacity: ▢2000 x 1500mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru PLANETARY GEAR BOX.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

Hi-End PLC with Touch Screen HMI for Auto Sequencing and Fault Diagnostic module.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point pillar type Hydraulic Blade Tensioning. . 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

7250 mm

2200 mm

4850 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

25 HP

Coolant motor

Hydraulic motor

0.25 HP

 3.0   HP

15930 x 80x 1.6 mm 
2000 x 1500mm 2000 x 1500mm
]]> https://www.indotechsaws.com/producto/itm-2000-1500-lmga-rf/feed/ 0 ITM-1500 LMGA (RF) https://www.indotechsaws.com/producto/itm-1050-lmga-rf/?utm_source=rss&utm_medium=rss&utm_campaign=itm-1050-lmga-rf https://www.indotechsaws.com/producto/itm-1050-lmga-rf/#respond Wed, 24 Nov 2021 19:27:14 +0000 https://www.indotechsaws.com/?post_type=product&p=30835 Saw band dimensions: 13840 x 80 x 1.6 mm Cutting capacity: Ø1500mm ▢1500 x 1500mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point pillar type Hydraulic Blade Tensioning. . 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

6300 mm

2200 mm

4550 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

20 HP

Coolant motor

Hydraulic motor

0.33 HP

 3.0   HP

13840 x 67/80 x 1.6 mm
 
Ø1500mm Ø1500mm 1500 x 1500mm 1500 x 1500mm
]]> https://www.indotechsaws.com/producto/itm-1050-lmga-rf/feed/ 0 ITM-1250 LMGA (RF) https://www.indotechsaws.com/producto/itm-1250-lmga-rf/?utm_source=rss&utm_medium=rss&utm_campaign=itm-1250-lmga-rf https://www.indotechsaws.com/producto/itm-1250-lmga-rf/#respond Wed, 24 Nov 2021 18:51:09 +0000 https://www.indotechsaws.com/?post_type=product&p=30827 Saw band dimensions: 12000 x 67 x 1.6 mm (80 mm Optional, If required) Cutting capacity: Ø1250mm ▢1250 x 1250mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru PLANETARY GEAR BOX.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point pillar type Hydraulic Blade Tensioning. . 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 600 mm (Stroke length shall be 550 mm with Bundle) and synchronized with auto cycle.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

5500 mm

1400 mm

3675 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

20 HP

Coolant motor

Hydraulic motor

0.33 HP

 2.0   HP

12500 x 67 x 1.6 mm (80 mm Optional, If required)

 
Ø1250mmØ1250mm1250 x 1250mm1250 x 1250mm
]]> https://www.indotechsaws.com/producto/itm-1250-lmga-rf/feed/ 0 ITM-1050 LMGA (RF) https://www.indotechsaws.com/producto/itm-1050lmga-rf/?utm_source=rss&utm_medium=rss&utm_campaign=itm-1050lmga-rf https://www.indotechsaws.com/producto/itm-1050lmga-rf/#respond Wed, 24 Nov 2021 18:33:39 +0000 https://www.indotechsaws.com/?post_type=product&p=30821 Saw band dimensions: 10650 x 67x 1.6 mm (80 mm Optional, If required) Cutting capacity: Ø1050mm ▢1050 x 1050mm  ]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru PLANETARY GEAR BOX.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point pillar type Hydraulic Blade Tensioning. . 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 1050 mm (Stroke length shall be 1050 mm with Bundle) and synchronized with auto cycle.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

4800 mm

2200 mm

3500 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

15.0 / 20 HP

Coolant motor

Hydraulic motor

0.25 HP

 2.0   HP

10650 x 67x 1.6 mm (80 mm Optional, If required)
 
Ø1050mmØ1050mm1050 x 1050mm1050 x 1050mm
]]> https://www.indotechsaws.com/producto/itm-1050lmga-rf/feed/ 0 ITM-850 LMGA (RF) https://www.indotechsaws.com/producto/itm-850-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-850-lmga https://www.indotechsaws.com/producto/itm-850-lmga/#respond Wed, 24 Nov 2021 18:17:17 +0000 https://www.indotechsaws.com/?post_type=product&p=30815 Saw band dimensions: 9215 x 67x 1.5 mm Cutting capacity: Ø850mm ▢850 x 850mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru PLANETARY GEAR BOX.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point pillar type Hydraulic Blade Tensioning. . 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 850 mm (Stroke length shall be 850 mm with Bundle) and synchronized with auto cycle.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

4600 mm

2200 mm

3100 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

15.0 HP

Coolant motor

Hydraulic motor

0.25 HP

 2.0   HP

9215 x 67 x 1.6 mm
 
Ø850mm Ø850mm 850 x 850mm 850 x 850mm
]]> https://www.indotechsaws.com/producto/itm-850-lmga/feed/ 0 ITM-650 LMGA (RF) https://www.indotechsaws.com/producto/itm-650lmga-rf/?utm_source=rss&utm_medium=rss&utm_campaign=itm-650lmga-rf https://www.indotechsaws.com/producto/itm-650lmga-rf/#respond Wed, 24 Nov 2021 17:42:31 +0000 https://www.indotechsaws.com/?post_type=product&p=30804 Saw band dimensions: 8200 x 67 x 1.6 mm Cutting capacity: Ø650mm ▢650x 650mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point pillar type Hydraulic Blade Tensioning. . 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 500mm (Stroke length shall be 440 mm with Bundle) and synchronized with auto cycle.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

4400 mm

2450 mm

2600 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

12.5/15.0 HP

Coolant motor

Hydraulic motor

0.25 HP

 3.0   HP

8200 x 67 x 1.6 mm
 
Ø650mm Ø650mm 650 x 650mm 650 x 650mm
]]> https://www.indotechsaws.com/producto/itm-650lmga-rf/feed/ 0 ITM-550 LMGA (RF) https://www.indotechsaws.com/producto/itm-550-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-550-lmga https://www.indotechsaws.com/producto/itm-550-lmga/#respond Wed, 24 Nov 2021 16:52:07 +0000 https://www.indotechsaws.com/?post_type=product&p=30795 Saw band dimensions: 8031 x 54 x 1.6 mm Cutting capacity: Ø550mm ▢550 x 550mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Manual Blade Tensioning. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 550 mm (Stroke length shall be 550 mm with Bundle) and synchronized with auto cycle.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

4200 mm

2200 mm

2500 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

12.5 HP

Coolant motor

Hydraulic motor

0.25 HP

 2.0   HP

8031 x 54 x 1.6 mm

 
Ø550mmØ550mm550 x 550mm550 x 550mm
]]> https://www.indotechsaws.com/producto/itm-550-lmga/feed/ 0 ITM-520 LMGA (RF) https://www.indotechsaws.com/producto/itm-550-lmga-2/?utm_source=rss&utm_medium=rss&utm_campaign=itm-550-lmga-2 https://www.indotechsaws.com/producto/itm-550-lmga-2/#respond Wed, 24 Nov 2021 15:00:23 +0000 https://www.indotechsaws.com/?post_type=product&p=31197 Saw band dimensions: 6650 x 41 x 1.3 mm Cutting capacity: Ø520mm ▢520 x 520mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Manual Blade Tensioning. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 520 mm (Stroke length shall be 520 mm with Bundle) and synchronized with auto cycle.

Adjustable Heavy duty Movable Blade guide with Hydraulic Locking Facility.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3500 mm

2150 mm

2200 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

12.5 HP

Coolant motor

Hydraulic motor

0.16 HP

 2.0   HP

6650 x 41 x 1.3 mm

 
Ø520mmØ520mm520 x 520mm520 x 520mm
]]> https://www.indotechsaws.com/producto/itm-550-lmga-2/feed/ 0 ITM-460 LMGA (RF) https://www.indotechsaws.com/producto/itm-460-lmga-rf/?utm_source=rss&utm_medium=rss&utm_campaign=itm-460-lmga-rf https://www.indotechsaws.com/producto/itm-460-lmga-rf/#respond Wed, 24 Nov 2021 12:32:25 +0000 https://www.indotechsaws.com/?post_type=product&p=30789 Saw band dimensions: 6540 x 41 x 1.3 mm Cutting capacity: Ø460mm ▢460 x 460mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Electrically Driven Swarf Conveyor.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art four point Pillar type Hydraulic Blade Tensioning.

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 460 mm (Stroke length shall be 460 mm with Bundle) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3250 mm

1950 mm

2050 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

7.5/10 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.5   HP

6540 x 41 x 1.3 mm
 
Ø460mm Ø460mm 460 x 460mm 460 x 460mm
]]> https://www.indotechsaws.com/producto/itm-460-lmga-rf/feed/ 0 ITM-415 LMGA https://www.indotechsaws.com/producto/itm-415-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-415-lmga https://www.indotechsaws.com/producto/itm-415-lmga/#respond Wed, 24 Nov 2021 11:57:24 +0000 https://www.indotechsaws.com/?post_type=product&p=30779 Saw band dimensions: 5500 x 41 x 1.3 mm Cutting capacity: Ø415mm ▢415 x 415mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 415 mm (Stroke length shall be 415 mm with Bundle) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel. Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3000 mm

1950 mm

1950 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

7.5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.5   HP

5500 x 41 x 1.3 mm
Ø415mm Ø415mm 415 x 415mm 415 x 415mm
]]> https://www.indotechsaws.com/producto/itm-415-lmga/feed/ 0