Tough line – Indotech Saws Europe S.L. https://www.indotechsaws.com Saws cutting machine Sat, 02 Aug 2025 18:56:56 +0000 es hourly 1 https://wordpress.org/?v=6.9.4 https://www.indotechsaws.com/wp-content/uploads/2021/11/indotechlogocortonormal42.png Tough line – Indotech Saws Europe S.L. https://www.indotechsaws.com 32 32 ITM-415 LMGS https://www.indotechsaws.com/producto/itm-415-lmgs/?utm_source=rss&utm_medium=rss&utm_campaign=itm-415-lmgs https://www.indotechsaws.com/producto/itm-415-lmgs/#respond Wed, 24 Nov 2021 11:58:13 +0000 https://www.indotechsaws.com/?post_type=product&p=31171 Saw band dimensions: 5500 x 41 x 1.3 mm Cutting capacity: Ø415mm ▢415 x 415mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 415 mm (Stroke length shall be 415 mm with Bundle) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel. Semi-automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3000 mm

1500 mm

1950 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

7.5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.5   HP

5500 x 41 x 1.3 mm
Ø415mm Ø415mm 415 x 415mm 415 x 415mm
]]> https://www.indotechsaws.com/producto/itm-415-lmgs/feed/ 0 ITM-415 LMGA https://www.indotechsaws.com/producto/itm-415-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-415-lmga https://www.indotechsaws.com/producto/itm-415-lmga/#respond Wed, 24 Nov 2021 11:57:24 +0000 https://www.indotechsaws.com/?post_type=product&p=30779 Saw band dimensions: 5500 x 41 x 1.3 mm Cutting capacity: Ø415mm ▢415 x 415mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Automatic height adjustment for saw frame to save idle time.

Auto indexing shuttle of stroke length of 415 mm (Stroke length shall be 415 mm with Bundle) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel. Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3000 mm

1950 mm

1950 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

7.5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.5   HP

5500 x 41 x 1.3 mm
Ø415mm Ø415mm 415 x 415mm 415 x 415mm
]]> https://www.indotechsaws.com/producto/itm-415-lmga/feed/ 0 ITM-360 LMGS https://www.indotechsaws.com/producto/itm-360-lmgs/?utm_source=rss&utm_medium=rss&utm_campaign=itm-360-lmgs https://www.indotechsaws.com/producto/itm-360-lmgs/#respond Wed, 10 Nov 2021 10:39:29 +0000 https://www.indotechsaws.com/?post_type=product&p=31157 Saw band dimensions: 4400 x 34 x 1.1 mm Cutting capacity: Ø360mm ▢360 x 360mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 500 mm (With Bundle Cutting 400mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Mounted Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.
Ergonomically designed Electrical Control Panel.
Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3000 mm

1950 mm

1500 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

5 HP

Type

Output

~ 3 x 415V, 50Hz

5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.0   HP

4400 x 34 x 1.1 mm
Ø360mm Ø360mm 360 x 360mm 310 x 360mm
]]> https://www.indotechsaws.com/producto/itm-360-lmgs/feed/ 0 ITM-360 LMGA https://www.indotechsaws.com/producto/itm-360-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-360-lmga https://www.indotechsaws.com/producto/itm-360-lmga/#respond Wed, 10 Nov 2021 10:38:56 +0000 https://www.indotechsaws.com/?post_type=product&p=31008 Saw band dimensions: 4400 x 34 x 1.1 mm Cutting capacity: Ø360mm ▢360 x 360mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 500 mm (With Bundle Cutting 400mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Mounted Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.
Ergonomically designed Electrical Control Panel.
Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

3000 mm

1950 mm

1950 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

5 HP

Type

Output

~ 3 x 415V, 50Hz

5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.0   HP

4400 x 34 x 1.1 mm
Ø360mm Ø360mm 360 x 360mm 360 x 360mm
]]> https://www.indotechsaws.com/producto/itm-360-lmga/feed/ 0 ITM-300 LMGS https://www.indotechsaws.com/producto/itm-300-lmgs/?utm_source=rss&utm_medium=rss&utm_campaign=itm-300-lmgs https://www.indotechsaws.com/producto/itm-300-lmgs/#respond Wed, 10 Nov 2021 10:33:25 +0000 https://www.indotechsaws.com/?post_type=product&p=30982 Saw band dimensions: 4400 x 34 x 1.1 mm Cutting capacity: Ø300mm ▢300 x 300mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 500 mm (With Bundle Cutting 400mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Mounted Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.
Ergonomically designed Electrical Control Panel.

DATOS TÉCNICOS

Length

Width

Height

2750 mm

1410 mm

1700 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

5 HP

Type

Output

~ 3 x 415V, 50Hz

5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.0   HP

4400 x 34 x 1.1 mm

Ø300mmØ300mm310 x 310mm310 x 310mm

]]> https://www.indotechsaws.com/producto/itm-300-lmgs/feed/ 0 ITM-300 LMGA https://www.indotechsaws.com/producto/itm-300-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-300-lmga https://www.indotechsaws.com/producto/itm-300-lmga/#respond Wed, 10 Nov 2021 10:32:48 +0000 https://www.indotechsaws.com/?post_type=product&p=30280 Saw band dimensions: 4400 x 34 x 1.1 mm Cutting capacity: Ø300mm ▢300 x 300mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Pillar type Blade Tensioning assembly. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 300 mm (With Bundle Cutting 300mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Mounted Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.
Ergonomically designed Electrical Control Panel.
Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

Length

Width

Height

2750 mm

1950 mm

1700 mm

Supply voltage

Protection degree

~ 3 x 415V, 50Hz

5 HP

Type

Output

~ 3 x 415V, 50Hz

5 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.0   HP

4400 x 34 x 1.1 mm

Ø300mmØ300mm300 x 300mm300 x 300mm
]]> https://www.indotechsaws.com/producto/itm-300-lmga/feed/ 0 ITM-210 LMGS https://www.indotechsaws.com/producto/itm-210/?utm_source=rss&utm_medium=rss&utm_campaign=itm-210 https://www.indotechsaws.com/producto/itm-210/#respond Tue, 09 Nov 2021 13:14:55 +0000 https://www.indotechsaws.com/?post_type=product&p=30990 Saw band dimensions: 4000 x 27 x 0.9 mm Cutting capacity: Ø210mm ▢210 x 210mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Manual Blade Tensioning. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 210 mm (With Bundle Cutting 210mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

DATOS TÉCNICOS

Length

Width

Height

2400 mm

1300 mm

1500 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

3.0 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.0   HP

4000 x 27 x 0.9 mm

 
Ø210mmØ210mm210 x 210mm210 x 210mm
]]> https://www.indotechsaws.com/producto/itm-210/feed/ 0 ITM-210 LMGA https://www.indotechsaws.com/producto/itm-210-lmga/?utm_source=rss&utm_medium=rss&utm_campaign=itm-210-lmga https://www.indotechsaws.com/producto/itm-210-lmga/#respond Tue, 09 Nov 2021 13:13:47 +0000 https://www.indotechsaws.com/?post_type=product&p=30267 Saw band dimensions: 4000 x 27 x 0.9 mm Cutting capacity: Ø210mm ▢210 x 210mm]]>

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Manual Blade Tensioning. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 500 mm (With Bundle Cutting 400mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

DATOS TÉCNICOS

High Efficiency Power Transmission to Saw thru HELICAL GEARED MOTOR.  

Saw Frame movement on Pre-hardened and Pre-loaded LM guides for friction free movement.

Cycle sequencing thru PLC and user friendly Touch Screen for easy operation.

Special bearing housing with heavy duty Cylindrical Roller bearing to isolate the Gear box from the load of blade tensioning.

Specially designed pressure valve to accurately balance the saw frame during cutting operation depending on material being cut thereby resulting in much better tool life.

NC Version – Length setting thru Digital Linear scale alongwith Sensor with Multiple Batch programming thru High End PLC with frequency convertor. Length to be set thru PLC without any Human intervention.

Powerised wire brush unit.

A.C. frequency control drive for infinite variation of band speed thru control panel.

Hydraulic Floating Shuttle Vice for uneven Bars.

Bar exhaust control unit.

Double Acting Hydraulic Cylinder for Main Vice and Shuttle Vice. 

State of art Manual Blade Tensioning. 

Infinitely variable Feed Control Valve for Setting the Cutting Rate.

Auto indexing shuttle of stroke length of 500 mm (With Bundle Cutting 400mm) and synchronized with auto cycle.

Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.

Separate Hydraulic Power Pack for easy maintenance with a tank of 80 Ltr.

Ergonomically designed Electrical Control Panel.

Automatic Machine OFF, in case of Blade Breakage.

Machine dimensions
Length 2400 mm
Width 1700 mm
Height 1500 mm
Machine electrical equipment
Supply voltage ~3 x 415V, 50Hz
Protection degree IP 54
Driving engine of the saw band
Type ~ 3 x 415V, 50Hz
Output 3.0 HP
Hydraulic and Coolant motor
Coolant motor 0.16HP
Hydraulic motor 1.0HP
Saw band dimensions
4000 x 27 x 0.9 mm
Cutting Capacity
Ø300 mm Ø300 mm 300 x 300 mm 300 x 300 mm

Length

Width

Height

2400 mm

1700 mm

1500 mm

Supply voltage

Protection degree

~3 x 415V, 50Hz

IP 54

Type

Output

~ 3 x 415V, 50Hz

3.0 HP

Coolant motor

Hydraulic motor

0.16 HP

 1.0   HP

4000 x 27 x 0.9 mm

 
Ø210mmØ210mm210 x 210mm210 x 210mm
]]> https://www.indotechsaws.com/producto/itm-210-lmga/feed/ 0